Note: these clamps work in 20mm dog holes and are too large to fit in 3/4" dog holes. 

This clamp kit is the ultimate compliment to any MFT table or workbench featuring 20mm dog holes. It will improve the quality and safety of your work. The kit contains all the clamps needed to secure nearly any shape or size workpiece to your bench for routing, drilling, sawing, sanding, planing, gluing, assembly, or any other operation. The kit includes two quick-action horizontal clamps, two quick-grip vertical clamps, and two bench dogs.

Horizontal Clamps: These clamps are sized to fit perfectly into any 20mm dog hole and provide strong lateral clamping forces against your workpiece. They operate via a cam action lever that enables quick, one-handed operation. They can generate up to 154 pounds or 70 kilograms of lateral force, more than enough to securely grip any size or shape workpiece. The non-marring rubber clamp pads protect your work and prevent slipping. The low-profile design ensures the clamps will not interfere with your material and will create an unobstructed work surface. They can be used by dropping into any 20mm dog hole or secured to your bench with the provided knobs. Securing the horizontal clamps and bench dogs tightly to your bench using the knobs significantly reduces the likelihood of your workpiece "lifting," especially when the clamp plunger approaches the end of its travel.

Vertical Clamps: These clamps also slip into any 20mm dog hole and provide strong downward clamping forces, pressing the work tightly against your bench to prevent lifting or sliding. They can be used by dropping into any 20mm dog hole or secured in place using the included locking knobs. The long quick-grip lever, combined with a quick-release trigger, allows for fast one-handed clamping and releasing of parts. They can generate up to 132 pounds of downward force, more than sufficient to keep work secured to your bench. The rubber non-marring clamp jaws pivot to secure irregularly shaped parts and protect your work.

Kit Contents: Included in the kit are two horizontal clamps with 6” reach with two locking knobs, two vertical clamps with 10” reach with two locking knobs, and two bench dogs with locking knobs, providing you with a comprehensive solution for all your MFT Table 20 mm hole clamping needs.

 Horizontal Clamps Specifications:

• Length: 9”
• Width: 5-1/2” including lever
• Height: 1-1/4” without post, 1-7/8” with post and 3” with post and knob
• Material: reinforced nylon body, induction-hardened C45 rails, and rubber clamp pads
• Clamping Force: 70 kg (154 pounds)
• Max Plunger Travel: 4-3/4”
• Max Plunger Reach: 6”
• Dog Hole Size: 20mm
• Optimal Workbench Thickness: unlimited without knob, 11/16” to 1-1/4” if using knob to secure
• Clamp Pad Size: 5/8” x 2-1/8”
• Knob size: 1-3/4” diameter x 1-1/4” high with 3/4” long threaded stud with M8 1.25 threads

• Size: 1-1/4” high x 2-1/8” wide x 1-1/4” deep with post and without knob  
• Dog Hole Size: 20mm
• Optimal Workbench Thickness: unlimited without knob, 11/16” to 1-1/4” if using knob to secure
• Clamp Pad Size: 5/8” x 2-1/8”
• Knob size: 1-3/4” diameter x 1-1/4” high with 3/4” long threaded stud with M8 1.25 threads
• Material: reinforced nylon with brass threaded insert

Vertical Clamps Specifications:

• Overall Length: 18-3/4”
• Width: 6-1/2”
• Thickness: 1” without knob, 1-3/4” with knob
• Maximum Clamping Height: 10”
• Material: reinforced nylon body, induction-hardened C45 rails, and rubber clamp pads
• Clamping Force: 132 pounds
• Dog Hole Size: 20mm
• Optimal Workbench Thickness: 3/4” to unlimited without knob, 5/8” to 2-3/4” if using knob to secure
• Clamp Pad Size: 1” X 1-3/8”
• Clamp Pad Pivot Range: 15 degrees

WARNING: Cancer and Reproductive Harm -