The Miter 5000 integrates a incremental angle control feature with a unique sled system to create a workstation with the capacity to handle big projects and accuracy & repeatability far beyond shop-made sleds.
Miter gauges don’t offer control or accuracy when pulled beyond the front of the saw, while the 5000 can crosscut 23" x 34" plywood cabinet sides with ease on most full size 10" table saws.
The 36" to 64" telescoping IncraLOCK Fence and Flip Shop Stop have plenty of range for long boards. Sleds allow better control because the lumber isn’t sliding on the saw’s top, and they’re safer for small parts, too – the 5000 has aluminum T-tracks embedded in the MDF platform to secure the included heavy duty Build-It hold-down clamp.
The sled can be set up on either the left side or right side of the blade, and a renewable Drop Panel provides zero clearance tearout control on both sides of the blade.
Compatibility:
- Miter Slot Size: The miter bar's adjustment range accommodates actual slot widths between 0.740" and 0.765" and is designed for 3/4" wide x 3/8" deep square-sided miter slots, with or without a 15/16" T-slot at the bottom.
- Miter slot spacing: The max distance between the miter slots is 12-1/2" center-to-center.
- Table size: For adequate support to the sides, the Miter 5000 needs a minimum of 10" measuring from the left-hand miter slot outward to the left edge of the saw table if the main sled will be to the left of the blade, or at least 10" from the right-hand miter slot to the outer right edge of the saw (sled can be installed on either side of the blade).
Note – The Miter 5000 is not recommended for portable or jobsite table saws.
Features:
- INCRA Flip Shop Stop: The Miter 5000 includes the top-of-the-line Flip Shop Stop for the ultimate in repeatable accuracy. The dual-arm design is exceptionally rigid and the arms can be separated and operated independently. The expandable body even allows the use of a wooden zero-clearance sub fence (hardware included!).
GlideLOCK Miter Bar: Six expansion disks adjust both sides of the bar for ZERO side play, anti-friction travel on all table saws with standard miter gauge channels, including Delta, Craftsman, imports, etc. This means that all of INCRA's incredible precision will actually show up in your work because the bar CAN'T wiggle around in the miter slot. The Miter 5000's adjustable miter bar will fit square-sided miter slots measuring 3/4" wide, 3/8" deep, and with or without a 15/16" T-slot at the bottom. The miter bar's adjustment range accommodates actual slot widths between 0.740" and 0.765".
- INCRA Hold Down Clamp: Included with every Miter 5000 is this simple and incredibly useful Hold Down Clamp which locks your workpiece onto the sled for maximum accuracy and the cleanest cuts possible. It only takes seconds to use and provides the rigidity needed for world class results.
- AngleLOCK Indexing: Precision angle indexing teeth are laser cut in solid steel to lock in 364 positive angle stops in 1/2°, 1° or 5° increments over a full 180° range. it's also continuously adjustable between 1/2° steps.
WARNING: Cancer and Reproductive Harm -
